StopTech Brakes...100-0 over and over! Kits for VW. GTI, Golf, Jetta,
Passat and Corrado
'98-'01 Passat
  It's
finally HERE! Introducing the ULTIMATE brake setup for your 1998-2001 VW Passat! This gorgeous
solution has been custom produced by StopTech for the VW Passat. Stratmosphere is
a StopTech select dealer for the awesome Passat brake solution. You need to seriously consider The serious solution
for your Passat.
Here's what you get:
 | One pair of front StopTech calipers with StopTech caliper bridge (Patent
Pending). Calipers are cast aluminum. |
| One pair of front two-piece StopTech 332x32 Slotted rotors with exclusive Patent
Pending vane cooling design. |
| StopTech brand only Directional Rotor Hats (Pat.
Pending). Twice as much airflow to the hot outer rotor surface! |
| One pair of front braided Stainless Steel brake lines. |
| One set of front High Performance Axxis Street brake pads. |
 OK, so why is this the brake setup to buy for the
Passat?
It's not even close! Nothing else compares. You will have to
spend $3500 and up to find a comparable system to the StopTech. Take a look at why you need this setup:
| Replacement pads for both front calipers are
only $124!!!!! |
| This complete solution has been custom designed by StopTech for the
Passat.
Custom Hats and Brackets. Custom-matched caliper pistons. Your brake feel
will be correct and linear (not like some kits that DO NOT match your car's
braking system!). |
| The StopTech caliper has a Patent Pending bridge that is stronger than a
Porsche "big red". |
| The two-piece StopTech rotor is slotted and designed with a new Patent
Pending ventilation vane design that is simply superior. |
| When your OEM brakes reach 900 degrees they are history. And this WILL
happen during high-performance driving. |
| This solution works. It's been track tested. It's awesome! |
| All StopTech parts are easily replaced. The brake pads are a standard and
extremely popular Porsche size. |
 This
kit does require a 17" wheel. Drop us an e-mail
for help on measuring for clearance. Are you convinced yet? Wait until you see the price! The complete solution
for your front brakes is $1995. that includes your rotors, calipers, pads and
lines. Everything you need. We also offer a set of Stainless Steel brake lines
for the REAR of your Passat. This helps to equalize the braking system on your Passat
and is STRONGLY recommended for optimal performance (and they are only $100).
GTI 1.8T/Golf 1.8T, Jetta '00-'01 1.8T &
'95-'01 GLS VR6, and
Turbo Beetle
 We are extremely pleased and excited to announce the new StopTech brake
solution for these VW high-performance cars. We specifically fit the '00-'01
Jetta 1.8T, '95-'01 Jetta GLS VR6, '00-'01 GTI and Golf 1.8T and Turbo
Beetle.
These kits do require 17" wheels to
clear the monstrous 328mm rotors. Drop us an e-mail
and we can tell you how to measure your car for fit.
Check out the Passat kit above for more technical details.
Same StopTech extreme performance engineering as our fantastic
Passat kit.
This kit has been custom-matched to the OEM TT Master Cylinder and OEM rear
brakes. The braking dynamics will be as normal but with unmatched ability to
stay cool time and time again. No bizarre pedal travel, no dangerous imbalance
with the front and rear brakes.
Here's what's included with these kits:
| One pair of front StopTech calipers with StopTech caliper bridge (Patent
Pending) in a cool stealth-black color. Calipers are cast aluminum. |
| One pair of 328 x 28 front two-piece StopTech Slotted rotors with exclusive Patent
Pending vane cooling design. |
| StopTech brand only Directional Rotor Hats (Pat.
Pending). Twice as much airflow to the hot outer rotor surface! Cooler and
extends pad life. |
| One pair of front braided Stainless Steel brake lines. |
| One set of front High Performance Street brake pads. |
'92-'95 Corrado VR6, '94-'95 GTI VR6, '94-'98
Jetta VR6, '93-'97 Passat VR6
How about a State-of-the-Art brake kit for your Corrado,
GTI, Jetta or Passat? StopTech rolls out another killing brake kit, but this
time for the awesome VR6 flavor VWs. We fit like a glove on
the '92-'95 Corrado VR6, '94-'95 GTI VR6, '94-'98 Jetta VR6, '93-'97 Passat
VR6.
These kits do require 17" wheels to
clear the monstrous 328mm rotors. Drop us an e-mail
and we can tell you how to measure your car for fit.
Check out the Passat kit above for more technical details.
Same StopTech extreme performance engineering as our fantastic
Passat kit.
This kit has been custom-matched to the OEM TT Master Cylinder and OEM rear
brakes. The braking dynamics will be as normal but with unmatched ability to
stay cool time and time again. No bizarre pedal travel, no dangerous imbalance
with the front and rear brakes.
Here's what's included with these kits:
| One pair of front StopTech calipers with StopTech caliper bridge (Patent
Pending) in a cool stealth-black color. Calipers are cast aluminum. |
| One pair of 328 x 28 front two-piece StopTech Slotted rotors with exclusive Patent
Pending vane cooling design. |
| StopTech brand only Directional Rotor Hats (Pat.
Pending). Twice as much airflow to the hot outer rotor surface! Cooler and
extends pad life. |
| One pair of front braided Stainless Steel brake lines. |
| One set of front High Performance Street brake pads. |
| 
